Inertia Reel Shoulder Harness Bracket Installation Kit, Rear
Inertia Reel Hardware Installation Kit, Rear only

Inertia Reel Shoulder Harness Bracket Installation Kit, Rear

Your Price:$59.00
In Stock
Part Number:40002-003-K

Parts Needed:

P/N 40003-001 27" Shoulder Harness, Inertia Reel w/lap belt OR/


P/N 40002-001 38" Shoulder Harness Inertia Reel and Lap Belt AND/


P/N 40002-003-K Experimental Shoulder Harness Installation Kit (PA-18 Inertia Rear Seat)

Tools Needed:

1   DUCKBILL PLIERS

1   RATCHET WRENCH

1   7/16 INCH SOCKET

1   7/16 COMBINATION WRENCH

A. Slip (2) tubing clamps around the upper rear diagonal fuselage tubes.

B. Insert (2) bolts (P/N AN4-12A) up through the holes closest to the edge in the plate (P/N 104112), (2) washers (P/N AN960-416), tubing clamps, (2) washers (P/N AN960-416), and secure with (2) nuts (P/N AN365-428A). Tighten nuts firmly.  Assure that the rear shoulder harness bracket is installed on the bottom side of the clamps with the nuts on top and tightened.



Related Items

Recently Viewed Items