Inertia Reel Shoulder Harness Bracket Installation Kit, Front
Inertia Reel Hardware Installation Kit, Front only

Inertia Reel Shoulder Harness Bracket Installation Kit, Front

Your Price:$49.95
In Stock
Part Number:40002-005-K

Parts Needed:

P/N 40003-001 for 27" Shoulder Harness, Inertia Reel w/lap belt OR/

P/N 40002-001 for 38" Shoulder Harness Inertia Reel and Lap Belt

AND/

P/N 40002-001-K Shoulder Harness Installation Kit (PA-18 Inertia Front Seat)

 

Tools Needed:

1   DUCKBILL PLIERS

1   RATCHET WRENCH

1   7/16 INCH SOCKET

1   7/16 COMBINATION WRENCH


FRONT SHOULDER HARNESS BRACKET INSTALLATION

A. Slip (2) tubing clamps around the rear spar carry through tube, on either side of the middle.

B. Insert (2) bolts (P/N AN4-12A) up through the holes closest to the edge in the plate (P/N 104110), (2) washers (P/N AN960-416), tubing clamps, (2) washers (P/N AN960-416), and secure with (2) nuts (P/N AN365-428A). May be tightened finger tight now and removed once headliner is fit so as not to be in the way for covering.

 (this kit is AN  and MS  type hardware.  The bracket is not a PMA'd part)


Related Items

Recently Viewed Items